Development of a New Low-Cost 3-D Flux Transverse Flux FSPMM with Soft Magnetic Composite Cores and Ferrite Magnets

Liu, C; Lei, G; Ma, B; Wang, Y; Guo, Y; Zhu, J

Development of a New Low-Cost 3-D Flux Transverse Flux FSPMM with Soft Magnetic Composite Cores and Ferrite Magnets

Liu, C Lei, G

Ma, B Wang, Y Guo, Y

Zhu, J

Permalink

Publication Type:: Journal Article
Citation:: IEEE Transactions on Magnetics, 2017, 53 (11)
Issue Date:: 2017-11-01

In Progress

	Filename	Description	Size
	410_full paper.pdf	Accepted Manuscript	983.29 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is being processed and is not currently available.

Full metadata record

Field	Value	Language
dc.contributor.author	Liu, C	en_US
dc.contributor.author	Lei, G https://orcid.org/0000-0002-8369-6802	en_US
dc.contributor.author	Ma, B	en_US
dc.contributor.author	Wang, Y	en_US
dc.contributor.author	Guo, Y https://orcid.org/0000-0001-6182-0684	en_US
dc.contributor.author	Zhu, J https://orcid.org/0000-0002-9763-4047	en_US
dc.date.issued	2017-11-01	en_US
dc.identifier.citation	IEEE Transactions on Magnetics, 2017, 53 (11)	en_US
dc.identifier.issn	0018-9464	en_US
dc.identifier.uri	http://hdl.handle.net/10453/124154
dc.description.abstract	© 1965-2012 IEEE. In this paper, a new 3-D flux transverse flux flux switching permanent magnet machine (3-DFTFFSPMM) is proposed. The cost of this machine is very low since both the soft magnetic composite (SMC) cores and ferrite magnets are very cheap, and the performance of this machine is good due to the special designed topology. For the qualitative analysis and initial design, the simplified power equation is developed to find the optimal design, and the 3-D finite-element method is applied for the quantitative analysis. Considering it is very difficult to obtain a special ferrite magnet in the current market, the 3-DFTFFSPMM for prototyping in the workshop is improved with a new design. For the prototyping, the SMC cores are made by using the manual die compacting technology. Last, the efficiency map of these two machines is obtained to judge the operational performance.	en_US
dc.relation.ispartof	IEEE Transactions on Magnetics	en_US
dc.relation.isbasedon	10.1109/TMAG.2017.2707386	en_US
dc.rights	info:eu-repo/semantics/restrictedAccess
dc.subject.classification	Applied Physics	en_US
dc.title	Development of a New Low-Cost 3-D Flux Transverse Flux FSPMM with Soft Magnetic Composite Cores and Ferrite Magnets	en_US
dc.type	Journal Article
utslib.citation.volume	11	en_US
utslib.citation.volume	53	en_US
utslib.for	0203 Classical Physics	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
utslib.for	02 Physical Sciences	en_US
utslib.for	09 Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
utslib.copyright.status	in_progress	*
pubs.issue	11	en_US
pubs.publication-status	Published	en_US
pubs.volume	53	en_US

Abstract:

© 1965-2012 IEEE. In this paper, a new 3-D flux transverse flux flux switching permanent magnet machine (3-DFTFFSPMM) is proposed. The cost of this machine is very low since both the soft magnetic composite (SMC) cores and ferrite magnets are very cheap, and the performance of this machine is good due to the special designed topology. For the qualitative analysis and initial design, the simplified power equation is developed to find the optimal design, and the 3-D finite-element method is applied for the quantitative analysis. Considering it is very difficult to obtain a special ferrite magnet in the current market, the 3-DFTFFSPMM for prototyping in the workshop is improved with a new design. For the prototyping, the SMC cores are made by using the manual die compacting technology. Last, the efficiency map of these two machines is obtained to judge the operational performance.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/124154