Research on an improved virtual flux droop control method with better dynamic and static performance

Wang, A; Zhang, J; Zhu, J

Research on an improved virtual flux droop control method with better dynamic and static performance

Wang, A Zhang, J Zhu, J

Permalink

Publication Type:: Conference Proceeding
Citation:: 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, 2017
Issue Date:: 2017-10-02

Closed Access

	Filename	Description	Size
	08056079.pdf	Published version	476.92 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Wang, A	en_US
dc.contributor.author	Zhang, J	en_US
dc.contributor.author	Zhu, J https://orcid.org/0000-0002-9763-4047	en_US
dc.date.issued	2017-10-02	en_US
dc.identifier.citation	2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, 2017	en_US
dc.identifier.isbn	9781538632468	en_US
dc.identifier.uri	http://hdl.handle.net/10453/126251
dc.description.abstract	© 2017 IEEE. In virtual flux droop method, power sharing is achieved by adjusting flux amplitude and angle which has some advantages of simplicity of control and lower voltage and frequency deviation. In this paper, a switch module of power calculation was firstly designed to balance system dynamic response and power fluctuation in flux droop controller. Then an improved direct flux controller was proposed to reduce the flux pulsation by tighter flux linkage control. At last, simulation results prove that the improved virtual flux droop method has better dynamic and static performance.	en_US
dc.relation.ispartof	2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017	en_US
dc.relation.isbasedon	10.1109/ICEMS.2017.8056079	en_US
dc.rights	info:eu-repo/semantics/closedAccess
dc.title	Research on an improved virtual flux droop control method with better dynamic and static performance	en_US
dc.type	Conference Proceeding
utslib.for	0906 Electrical and Electronic Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
utslib.copyright.status	closed_access	*
pubs.publication-status	Published	en_US

Abstract:

© 2017 IEEE. In virtual flux droop method, power sharing is achieved by adjusting flux amplitude and angle which has some advantages of simplicity of control and lower voltage and frequency deviation. In this paper, a switch module of power calculation was firstly designed to balance system dynamic response and power fluctuation in flux droop controller. Then an improved direct flux controller was proposed to reduce the flux pulsation by tighter flux linkage control. At last, simulation results prove that the improved virtual flux droop method has better dynamic and static performance.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/126251