Study of Critical Hydraulic Gradients for Seepage-Induced Failures in Granular Soils
- Publisher:
- American Society of Civil Engineers (ASCE)
- Publication Type:
- Journal Article
- Citation:
- Journal of Geotechnical and Geoenvironmental Engineering, 2019, 145, (7)
- Issue Date:
- 2019-07-01
Closed Access
| Filename | Description | Size | |||
|---|---|---|---|---|---|
| %28ASCE%29GT.1943-5606.0002062.pdf | Published version | 2.01 MB |
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
© 2019 American Society of Civil Engineers. This paper reports on a series of laboratory hydraulic tests on a select range of granular soils compacted at relative densities between 0% and 100%. The critical hydraulic gradient at the onset of seepage failure (i.e., heave and suffusion) is considerably smaller than unity for internally unstable (i.e., nonuniform) sand-gravel mixtures due to stress reduction in their finer fraction. For example, stable uniform fine sands have been shown to exhibit heave at hydraulic gradients ≥1.0, whereas sand-gravel mixtures suffer from suffusion at hydraulic gradients ≥1.0. The boundary friction from the cell walls of test equipment would influence the development of heave, while suffusion is controlled by interparticle friction. In this study, the critical hydraulic gradient is modeled theoretically by considering the effects of interparticle and boundary frictions, and stress reduction in the soil. The experimental results from both this and past studies are used to verify the proposed model, which showed good agreement with experimental observations with less than 5% standard error.
Please use this identifier to cite or link to this item: