3-D printed smart orthotic insoles: Monitoring a person's gait step by step

Hao, Z; Cook, K; Canning, J; Chen, HT; Martelli, C

3-D printed smart orthotic insoles: Monitoring a person's gait step by step

Hao, Z Cook, K Canning, J

Chen, HT Martelli, C

Permalink

Publisher:: Institute of Electrical and Electronics Engineers (IEEE)
Publication Type:: Journal Article
Citation:: IEEE Sensors Letters, 2020, 4, (1), pp. 1-4
Issue Date:: 2020-01-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download full textAdobe PDF (629.56 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Hao, Z
dc.contributor.author	Cook, K
dc.contributor.author	Canning, J https://orcid.org/0000-0001-8281-7783
dc.contributor.author	Chen, HT
dc.contributor.author	Martelli, C
dc.date.accessioned	2020-08-25T05:18:29Z
dc.date.available	2020-08-25T05:18:29Z
dc.date.issued	2020-01-01
dc.identifier.citation	IEEE Sensors Letters, 2020, 4, (1), pp. 1-4
dc.identifier.issn	2475-1472
dc.identifier.uri	http://hdl.handle.net/10453/142354
dc.description.abstract	© 2017 IEEE. This article reports a 3-D printing intelligent insole gait monitoring system based on an embedded fiber Bragg grating (FBG). The smart insole combines 3-D printing technology and FBG sensors providing high sensitivity and end-point low cost. Results using pressure points measured by four FBGs are sufficient to differentiate foot loads and gait types.
dc.language	en
dc.publisher	Institute of Electrical and Electronics Engineers (IEEE)
dc.relation	http://purl.org/au-research/grants/arc/LE100100082
dc.relation.ispartof	IEEE Sensors Letters
dc.relation.isbasedon	10.1109/LSENS.2019.2962270
dc.rights	© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.	en_US
dc.rights	info:eu-repo/semantics/openAccess
dc.title	3-D printed smart orthotic insoles: Monitoring a person's gait step by step
dc.type	Journal Article
utslib.citation.volume	4
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Computer Science
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Strength - GBDTC - Global Big Data Technologies
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
utslib.copyright.status	open_access	*
dc.date.updated	2020-08-25T05:18:26Z
pubs.issue	1
pubs.publication-status	Published
pubs.volume	4
utslib.citation.issue	1

Abstract:

© 2017 IEEE. This article reports a 3-D printing intelligent insole gait monitoring system based on an embedded fiber Bragg grating (FBG). The smart insole combines 3-D printing technology and FBG sensors providing high sensitivity and end-point low cost. Results using pressure points measured by four FBGs are sufficient to differentiate foot loads and gait types.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/142354