Correction: Biodiesel production from transesterification of Australian Brassica napus L. oil: optimisation and reaction kinetic model development (Environment, Development and Sustainability, (2022), 10.1007/s10668-022-02506-0)

Hazrat, MA; Rasul, MG; Khan, MMK; Ashwath, N; Fattah, IMR; Ong, HC; Mahlia, TMI

Correction: Biodiesel production from transesterification of Australian Brassica napus L. oil: optimisation and reaction kinetic model development (Environment, Development and Sustainability, (2022), 10.1007/s10668-022-02506-0)

Hazrat, MA Rasul, MG Khan, MMK Ashwath, N Fattah, IMR Ong, HC Mahlia, TMI

Permalink

Publisher:: SPRINGER
Publication Type:: Journal Article
Citation:: Environment, Development and Sustainability, 2022
Issue Date:: 2022-01-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Published versionAdobe PDF (570.61 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Hazrat, MA
dc.contributor.author	Rasul, MG
dc.contributor.author	Khan, MMK
dc.contributor.author	Ashwath, N
dc.contributor.author	Fattah, IMR
dc.contributor.author	Ong, HC
dc.contributor.author	Mahlia, TMI
dc.date.accessioned	2023-01-12T21:55:58Z
dc.date.available	2023-01-12T21:55:58Z
dc.date.issued	2022-01-01
dc.identifier.citation	Environment, Development and Sustainability, 2022
dc.identifier.issn	1387-585X
dc.identifier.issn	1573-2975
dc.identifier.uri	http://hdl.handle.net/10453/164905
dc.description.abstract	Unfortunately, the original article contains error in Sect. 3.3. Fuel Composition. The correct data have been provided below in this correction article. 3.3. Fuel composition The fatty acid composition of the produced biodiesel through the optimisation process is shown in Table 8. From the table, it can be seen that Australian canola oil is mostly composed of methyl oleate, with 42.47 wt% included in the composition. This is followed by 27.85 wt% and 16.65 wt% methyl linoleate and methyl linoleate, respectively. A similar FAC was observed by Issariyakul and Dalai (2010) with slight difference in methyl oleate and methyl linolenate percentages. The main component of their canola oil biodiesel is methyl oleate which contains 60.92 wt% of this component. Based on the composition, canola biodiesel contains a total of 12.89 wt% saturated FAME component, 42.61 wt% monounsaturated FAME and 44.5 wt% polyunsaturated FAME. Table 9 compares the properties of produced canola biodiesel and diesel. According to the table, canola oil biodiesel has a 21.5% higher cetane number but a 6% lower LHV than diesel fuel.
dc.language	English
dc.publisher	SPRINGER
dc.relation.ispartof	Environment, Development and Sustainability
dc.relation.isbasedon	10.1007/s10668-022-02617-8
dc.rights	info:eu-repo/semantics/openAccess
dc.subject	0502 Environmental Science and Management, 0701 Agriculture, Land and Farm Management, 1604 Human Geography
dc.subject.classification	Ecology
dc.title	Correction: Biodiesel production from transesterification of Australian Brassica napus L. oil: optimisation and reaction kinetic model development (Environment, Development and Sustainability, (2022), 10.1007/s10668-022-02506-0)
dc.type	Journal Article
utslib.for	0502 Environmental Science and Management
utslib.for	0701 Agriculture, Land and Farm Management
utslib.for	1604 Human Geography
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CAMGIS - Centre for Advanced Modelling and Geospatial lnformation Systems
utslib.copyright.status	open_access	*
dc.date.updated	2023-01-12T21:55:57Z
pubs.publication-status	Published

Abstract:

Unfortunately, the original article contains error in Sect. 3.3. Fuel Composition. The correct data have been provided below in this correction article. 3.3. Fuel composition The fatty acid composition of the produced biodiesel through the optimisation process is shown in Table 8. From the table, it can be seen that Australian canola oil is mostly composed of methyl oleate, with 42.47 wt% included in the composition. This is followed by 27.85 wt% and 16.65 wt% methyl linoleate and methyl linoleate, respectively. A similar FAC was observed by Issariyakul and Dalai (2010) with slight difference in methyl oleate and methyl linolenate percentages. The main component of their canola oil biodiesel is methyl oleate which contains 60.92 wt% of this component. Based on the composition, canola biodiesel contains a total of 12.89 wt% saturated FAME component, 42.61 wt% monounsaturated FAME and 44.5 wt% polyunsaturated FAME. Table 9 compares the properties of produced canola biodiesel and diesel. According to the table, canola oil biodiesel has a 21.5% higher cetane number but a 6% lower LHV than diesel fuel.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/164905