Crystal plasticity finite element modelling of the influence of friction on surface roughening during uniaxial planar compression

Li, HJ; Jiang, ZY; Wei, DB; Han, JT; Tieu, AK

Crystal plasticity finite element modelling of the influence of friction on surface roughening during uniaxial planar compression

Li, HJ Jiang, ZY Wei, DB

Han, JT Tieu, AK

Permalink

Publication Type:: Conference Proceeding
Citation:: Materials Science Forum, 2010, 654-656 pp. 1606 - 1609
Issue Date:: 2010-08-17

Closed Access

	Filename	Description	Size
	2013003173OK.pdf	Published version	770.78 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Li, HJ	en_US
dc.contributor.author	Jiang, ZY	en_US
dc.contributor.author	Wei, DB https://orcid.org/0000-0002-4247-8905	en_US
dc.contributor.author	Han, JT	en_US
dc.contributor.author	Tieu, AK	en_US
dc.date.issued	2010-08-17	en_US
dc.identifier.citation	Materials Science Forum, 2010, 654-656 pp. 1606 - 1609	en_US
dc.identifier.isbn	0878492550	en_US
dc.identifier.isbn	9780878492558	en_US
dc.identifier.issn	0255-5476	en_US
dc.identifier.uri	http://hdl.handle.net/10453/32084
dc.description.abstract	The friction is a key factor that influences the surface quality in metal forming. To figure out the relationship between the friction and the surface roughening, a finite element model is employed in the commercial finite element software ABAQUS to simulate the surface roughness of top side of Al plate during uniaxial planar compression. With the change of friction conditions, the surface roughening varies. The average surface roughness (Ra) shows a relationship with the friction coefficient. During the surface roughening process, the grain slip takes place in the "soft orientation", and the "hard orientations" become the barrier of the slip. © Trans Tech Publications.	en_US
dc.relation.ispartof	Materials Science Forum	en_US
dc.relation.isbasedon	10.4028/www.scientific.net/MSF.654-656.1606	en_US
dc.subject.classification	Nanoscience & Nanotechnology	en_US
dc.subject.classification	Materials	en_US
dc.title	Crystal plasticity finite element modelling of the influence of friction on surface roughening during uniaxial planar compression	en_US
dc.type	Conference Proceeding
utslib.citation.volume	654-656	en_US
utslib.for	0912 Materials Engineering	en_US
utslib.for	0306 Physical Chemistry (incl. Structural)	en_US
dc.location.activity	Cairns, AUSTRALIA
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
utslib.copyright.status	closed_access
pubs.publication-status	Published	en_US
pubs.volume	654-656	en_US

Abstract:

The friction is a key factor that influences the surface quality in metal forming. To figure out the relationship between the friction and the surface roughening, a finite element model is employed in the commercial finite element software ABAQUS to simulate the surface roughness of top side of Al plate during uniaxial planar compression. With the change of friction conditions, the surface roughening varies. The average surface roughness (Ra) shows a relationship with the friction coefficient. During the surface roughening process, the grain slip takes place in the "soft orientation", and the "hard orientations" become the barrier of the slip. © Trans Tech Publications.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/32084