Strength development in autoclaved aluminosilicate rich industrial waste-cement systems containing reactive magnesia

Liu, B; Ray, AS; Thomas, PS

Strength development in autoclaved aluminosilicate rich industrial waste-cement systems containing reactive magnesia

Liu, B Ray, AS Thomas, PS

Permalink

Publication Type:: Journal Article
Citation:: Journal of the Australian Ceramic Society, 2007, 43 (1), pp. 82 - 87
Issue Date:: 2007-12-01

Closed Access

	Filename	Description	Size
	2007002402.pdf		208.29 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Liu, B	en_US
dc.contributor.author	Ray, AS	en_US
dc.contributor.author	Thomas, PS https://orcid.org/0000-0001-6962-2121	en_US
dc.date.issued	2007-12-01	en_US
dc.identifier.citation	Journal of the Australian Ceramic Society, 2007, 43 (1), pp. 82 - 87	en_US
dc.identifier.issn	0004-881X	en_US
dc.identifier.uri	http://hdl.handle.net/10453/3298
dc.description.abstract	Addition of supplementary cementing materials (SCM) to produce blended Portland cements (PC) is a well established practice in the manufacture of construction materials since they permit less overall consumption of PC thereby reducing CO2 emissions. This study reports findings on the strength development of autoclaved Portland cement (PC) - quartz blends where PC was partially replaced by alumina-silica rich fired clay brick waste frees, a proven SCM, and reactive magnesia. Chemical and physical properties of the mixes were characterised by means of compressive strength testing thermal analysis, x-ray diffractometry (XRD) and scanning electron microscopy (SEM).	en_US
dc.relation.ispartof	Journal of the Australian Ceramic Society	en_US
dc.subject.classification	Materials	en_US
dc.title	Strength development in autoclaved aluminosilicate rich industrial waste-cement systems containing reactive magnesia	en_US
dc.type	Journal Article
utslib.citation.volume	1	en_US
utslib.citation.volume	43	en_US
utslib.for	0912 Materials Engineering	en_US
utslib.for	0303 Macromolecular and Materials Chemistry	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
pubs.organisational-group	/University of Technology Sydney/Faculty of Science
pubs.organisational-group	/University of Technology Sydney/Faculty of Science/School of Mathematical and Physical Sciences
pubs.organisational-group	/University of Technology Sydney/Strength - CBI - Centre for Built Infrastructure
utslib.copyright.status	closed_access
pubs.issue	1	en_US
pubs.publication-status	Published	en_US
pubs.volume	43	en_US

Abstract:

Addition of supplementary cementing materials (SCM) to produce blended Portland cements (PC) is a well established practice in the manufacture of construction materials since they permit less overall consumption of PC thereby reducing CO2 emissions. This study reports findings on the strength development of autoclaved Portland cement (PC) - quartz blends where PC was partially replaced by alumina-silica rich fired clay brick waste frees, a proven SCM, and reactive magnesia. Chemical and physical properties of the mixes were characterised by means of compressive strength testing thermal analysis, x-ray diffractometry (XRD) and scanning electron microscopy (SEM).

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/3298