Calibration of sensing coils of a three-dimensional magnetic property tester

Guo, Y; Zhu, J; Lin, Z; Zhong, J; Lu, H; Wang, S

Calibration of sensing coils of a three-dimensional magnetic property tester

Guo, Y

Zhu, J

Lin, Z Zhong, J Lu, H Wang, S

Permalink

Publication Type:: Journal Article
Citation:: IEEE Transactions on Magnetics, 2006, 42 (10), pp. 3243 - 3245
Issue Date:: 2006-10-01

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download full textAdobe PDF (158.22 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Guo, Y https://orcid.org/0000-0001-6182-0684	en_US
dc.contributor.author	Zhu, J https://orcid.org/0000-0002-9763-4047	en_US
dc.contributor.author	Lin, Z	en_US
dc.contributor.author	Zhong, J	en_US
dc.contributor.author	Lu, H	en_US
dc.contributor.author	Wang, S	en_US
dc.date.issued	2006-10-01	en_US
dc.identifier.citation	IEEE Transactions on Magnetics, 2006, 42 (10), pp. 3243 - 3245	en_US
dc.identifier.issn	0018-9464	en_US
dc.identifier.uri	http://hdl.handle.net/10453/5681
dc.description.abstract	For electrical machines with three-dimensional (3-D) magnetic fluxes, the magnetic properties of magnetic materials under 3-D excitations should be properly determined and applied in machine design and analysis. This paper presents the construction and calibration of the H (field strength) and B (flux density) sensing coils of a 3-D magnetic property testing system, and the correction of measurement error due to the misalignment of sensing coils with excitation fields. The 3-D tester has been used to measure the magnetic properties of soft magnetic composite (SMC), a material specially developed for application of 3-D flux electrical machines. Some 3-D results have been obtained on a cubic SMC sample. The measurement errors caused by the misalignment of sensing coils and excitation fields are corrected by a rotational transformation of coordinates. © 2006 IEEE.	en_US
dc.relation.ispartof	IEEE Transactions on Magnetics	en_US
dc.relation.isbasedon	10.1109/TMAG.2006.878411	en_US
dc.subject.classification	Applied Physics	en_US
dc.title	Calibration of sensing coils of a three-dimensional magnetic property tester	en_US
dc.type	Journal Article
utslib.citation.volume	10	en_US
utslib.citation.volume	42	en_US
utslib.for	0915 Interdisciplinary Engineering	en_US
utslib.for	0906 Electrical and Electronic Engineering	en_US
utslib.for	02 Physical Sciences	en_US
utslib.for	09 Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
pubs.organisational-group	/University of Technology Sydney/Strength - GEVI - Green Energy and Vehicle Innovations
utslib.copyright.status	open_access
pubs.issue	10	en_US
pubs.publication-status	Published	en_US
pubs.volume	42	en_US

Abstract:

For electrical machines with three-dimensional (3-D) magnetic fluxes, the magnetic properties of magnetic materials under 3-D excitations should be properly determined and applied in machine design and analysis. This paper presents the construction and calibration of the H (field strength) and B (flux density) sensing coils of a 3-D magnetic property testing system, and the correction of measurement error due to the misalignment of sensing coils with excitation fields. The 3-D tester has been used to measure the magnetic properties of soft magnetic composite (SMC), a material specially developed for application of 3-D flux electrical machines. Some 3-D results have been obtained on a cubic SMC sample. The measurement errors caused by the misalignment of sensing coils and excitation fields are corrected by a rotational transformation of coordinates. © 2006 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/5681