Thermal characterisation of autoclaved cement made with alumina-silica rich industrial waste

Connan, H; Klimesch, D; Ray, A; Thomas, P

Thermal characterisation of autoclaved cement made with alumina-silica rich industrial waste

Connan, H Klimesch, D Ray, A Thomas, P

Permalink

Publication Type:: Journal Article
Citation:: Journal of Thermal Analysis and Calorimetry, 2006, 84 (2), pp. 521 - 525
Issue Date:: 2006-05-01

Closed Access

	Filename	Description	Size
	2006004000.pdf		562.77 kB	Adobe PDF	View/Open

Copyright Clearance Process

Recently Added
In Progress
Closed Access

This item is closed access and not available.

Full metadata record

Field	Value	Language
dc.contributor.author	Connan, H	en_US
dc.contributor.author	Klimesch, D	en_US
dc.contributor.author	Ray, A	en_US
dc.contributor.author	Thomas, P https://orcid.org/0000-0001-6962-2121	en_US
dc.date.issued	2006-05-01	en_US
dc.identifier.citation	Journal of Thermal Analysis and Calorimetry, 2006, 84 (2), pp. 521 - 525	en_US
dc.identifier.issn	1388-6150	en_US
dc.identifier.uri	http://hdl.handle.net/10453/601
dc.description.abstract	The hydration products of hydrothermally cured OPC-quartz blends incorporating clay-brick waste were characterised using simultaneous DTA-TG, XRD and SEM. The exotherm above 800°C on the DTA curve, due to the formation of β-wollastonite (β-CS) was related to the compressive strength. The area and/or height of the exotherm increased with compressive strength and was due primarily to the presence of calcium silicate hydrate phases including 1.1 nm tobermorite. Supporting evidence is provided by XRD and SEM. © 2006 Akadémiai Kiadó.	en_US
dc.relation.ispartof	Journal of Thermal Analysis and Calorimetry	en_US
dc.relation.isbasedon	10.1007/s10973-005-6674-z	en_US
dc.subject.classification	Physical Chemistry	en_US
dc.title	Thermal characterisation of autoclaved cement made with alumina-silica rich industrial waste	en_US
dc.type	Journal Article
utslib.citation.volume	2	en_US
utslib.citation.volume	84	en_US
utslib.for	0306 Physical Chemistry (incl. Structural)	en_US
utslib.for	0303 Macromolecular and Materials Chemistry	en_US
utslib.for	0399 Other Chemical Sciences	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Civil and Environmental Engineering
pubs.organisational-group	/University of Technology Sydney/Faculty of Science
pubs.organisational-group	/University of Technology Sydney/Faculty of Science/School of Mathematical and Physical Sciences
pubs.organisational-group	/University of Technology Sydney/Strength - CBI - Centre for Built Infrastructure
utslib.copyright.status	closed_access
pubs.issue	2	en_US
pubs.publication-status	Published	en_US
pubs.volume	84	en_US

Abstract:

The hydration products of hydrothermally cured OPC-quartz blends incorporating clay-brick waste were characterised using simultaneous DTA-TG, XRD and SEM. The exotherm above 800°C on the DTA curve, due to the formation of β-wollastonite (β-CS) was related to the compressive strength. The area and/or height of the exotherm increased with compressive strength and was due primarily to the presence of calcium silicate hydrate phases including 1.1 nm tobermorite. Supporting evidence is provided by XRD and SEM. © 2006 Akadémiai Kiadó.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/601