Effect of cooling rate on oxidation behaviour of microalloyed steel
- Publication Type:
- Journal Article
- Citation:
- Applied Mechanics and Materials, 2013, 395-396 pp. 273 - 278
- Issue Date:
- 2013-10-29
Closed Access
Filename | Description | Size | |||
---|---|---|---|---|---|
8c20491ef6ab0a8e9a61dc3fd1a5ce16b6c1.pdf | Published Version | 420.97 kB |
Copyright Clearance Process
- Recently Added
- In Progress
- Closed Access
This item is closed access and not available.
Oxidation characteristics of a microalloyed low carbon steel were investigated by a hot rolling mill combined with acceleration cooling system over the cooling rate range from 20 to 70°C/s. The effects of cooling rate after hot rolling on microstructure and phase composition of oxide scale were examined. The results showed that the increase of the cooling rate has a significant influence on the decrease of the grain size and surface roughness of oxide scale. A higher cooling rate promotes the formation of retain wustite and primary magnetite precipitation while suppression of eutectoid α-iron precipitates. This provides the possibility to enhance potential contribution of magnetite precipitates with preferable ductility, and hence fabricates a desired oxide-scale structure under continuous post cooling conditions considering a suitable cooling rate. © (2013) Trans Tech Publications, Switzerland.
Please use this identifier to cite or link to this item: